Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
  • Long life
  • Downsized, low impedance and high-ripple current version of GXE series
  • Specified ESR after endurance test
  • For high ripple current automotive applications. (Direct fuel injection and electric power steering etc.)
  • Endurance with ripple current : 3,000 to 5,000 hours at 125 ?C
  • Solvent resistant type
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Nippon Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A GPA

Capacitance

 N/A 1000 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature (Initial)

 N/A 0.44 Ω

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency and -40 Degree Celsius (ºC) Temperature (Initial)

 N/A 0.33 Ω

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature (End of Life)

 N/A 0.070 Ω

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency and -40 Degree Celsius (ºC) Temperature (End of Life)

 N/A 0.90 Ω

Rated Ripple Current at 125 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

 N/A 2580 mArms

Temperature Range

 N/A -40 to +125 ºC

Working Direct Current (DC) Voltage

 N/A 100 V

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

 N/A I=0.03CV or 4 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature1 N/A 0.08

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 4

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

 N/A 16 mm

Maximum Diameter (D)

 N/A 16.5 mm

Dimension L

 N/A 35 mm

Maximum Dimension L

 N/A 36.5 mm

Diameter (d)

 N/A 0.8 mm

Dimension F

 N/A 7.5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 0.60

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 0.87

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 0.95

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

 N/A 1

Note for Rated Ripple Current Multipliers

 N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours (3,000 hours for 25L and less) at 125 ºC.

Capacitance change: ≤ ±30% of the initial value
D.F. (tan δ): ≤ 300% of the initial specified value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 125 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4..

Capacitance change: ≤ ±30% of the initial value
D.F. (tan δ): ≤ 300% of the initial specified value
Leakage current: ≤ The initial specified value

Note

Note

 N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information product specifications.
  • 1 When nominal capacitance exceeds 1,000 µF, add 0.02 to the above value for each 1,000 µF increase.