Projections Unlimited, Inc
PUI | Global Corporate HQ
15311 Barranca Parkway
Irvine , CA , 92618
United States
Phone:(714) 544-2700
Email: sales@gopui.com
Print Back
Non-Contacting Hall Effect Technology
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A HF

Environmental Specifications

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Storage Temperature

 N/A -40 to 85 ºC-40 to 185 ºF
Above Panel Sealing1 N/A 3 Axis Up to Ingress Protection (IP) 67 (subject to final specifications)

Extended Electromagnetic Compatibility (EMC) Immunity Level (Volt (V)/Metre (M))

 N/A EN61000-4-3

Electromagnetic Compatibility (EMC) Emissions Level

 N/A EN61000-6-3:2001

Electrostatic Discharge (ESD)

 N/A EN61000-4-3 Level 2 (±4 kv contact, ± 6 kv air)

Output Linearity (±)

 N/A 200 mV

Dual Output Interlinearity (X/Y) (±)

 N/A 400 mV

Dual Output Interlinearity (Z) (±)

 N/A 600 mV

Sensor Specifications

Sensor

 N/A Dual Hall Effect Single

Direct Current (DC) Voltage Range

 N/A 5 V

Direct Current (DC) Voltage Range Tolerance (±)

 N/A 0.01 V

Typical Supply Current

 N/A 40 mA

Maximum Supply Current

 N/A 50 mA

Maximum Reverse Polarity for Direct Current Voltage (VDC)

 N/A -10

Maximum Transient Voltage for Direct Current Voltage (VDC)

 N/A 16 V

Output Current

 N/A 8 mA

Minimum Output Load

 N/A 1 kΩ

Output Impedance

 N/A 2 Ω

Materials

Shaft Material

 N/A Stainless Steel

Boot Material

 N/A Silicone
Handle Material2 N/A Glass Filled Nylon

Body Material

 N/A Glass Filled Nylon

Mechanical Specifications

Break Out Force (X/Y Axis)

 N/A 1.3 N0.3 lbf

Operating Force (X/Y Axis)

 N/A 2.8 N0.63 lbf

Deflection Angle (X/Y Axis)

 N/A 36 º

Deflection Angle From Centre (X/Y Axis) (±)

 N/A 18 º

Expected Mechanical Life (X/Y Axis)

 N/A 5 Million Lifecycles

Lever Action (X/Y Axis)

 N/A Omnidirectional Single Spring

Break Out Force (Z Axis)

 N/A 0.09 N0.80 lbf

Operating Force (Z Axis)

 N/A 0.121 N1.07 lbf

Deflection Angle (Z Axis)

 N/A 60 º

Deflection Angle From Centre (Z Axis)

 N/A 30 º

Expected Mechanical Life (Z Axis)

 N/A 5 Million Lifecycles

Handle Action (Z Axis)

 N/A Spring Centering

Distinctive Features

Distinctive Features

 N/A
  • One, two or three axis
  • Analog outputs
  • CAN bus J1939 and CANopen options
  • USB 2.0 HID interface options
  • Connectorized housing

Note

Note

 N/A The company reserves the right to change specifications without notice
  • 1 Subject to final specifications
  • 2 Most handles, dependent upon configurations