Print Back
Multimec? 5 series is the new generation of 3A, 3F, 4A and 4F switch. In principle the Multimec? 5 series is very similar to the 3 series - it has the same pin layout, the same dimensions and the same electrical specifications.

The four main updates are the cap retention system and actuator, three standard actuation forces, one temperature range and possibility of normally closed/normally open function.
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A 5

Type

N/A Non-Illuminated

Mounting Type

N/A Through-Hole

Current

N/A 50 mA

Direct Current (DC) Voltage

N/A 24 V

Temperature Range

N/A -40 to 160 ºC

Tolerances (±)

N/A 0.2 mm

Electrical Specifications

Contact Resistance

N/A < 30 mΩ

Typical Contact Resistance

N/A 10 mΩ

Insulation Resistance

N/A > 10 MΩ

Recommended Current at 24 Volts (V) Direct Current (DC) for Silver Contacts

N/A 0.5 to 50 mA

Recommended Current at 24 Volts (V) Direct Current (DC) for Gold Contacts

N/A 0.5 μ to 50 mA

Contact Bounce

N/A < 2 ms

Typical Contact Bounce

N/A 0.5 ms

Mechanical Specifications

Standard Actuation Force

N/A 2 N3.5 N6.5 N

Standard Actuation Force (Normally Closed (NS)/Normally Open (NO) Function)

N/A 3.5 N

Maximum Actuation Force without Cap for 60 Seconds (sec)

N/A 115 N

Maximum Actuation Force without Cap for 10 Seconds (sec) (Normally Closed (NS)/Normally Open (NO) Function)

N/A 100 N

Key Travel

N/A 1 mm

Lifetime

N/A > 1,000,000 Cycles (Normally Closed (NS)/Normally Open (NO) Function) > 10,000,000 Cycles (for Silver and Gold)

Temperature Range

Minimum Working Temperature

N/A -40 ºC

Maximum Working Temperature

N/A 160 ºC

Minimum Storage Temperature

N/A -40 ºC

Maximum Storage Temperature

N/A 160 ºC

Soldering (Through-Hole Switch)

N/A Flux tight. IEC 68-2-20 8 Infrared, vapor phase, wave - max 240 ºC for max 40 sec or max 260 ºC for max 30 sec. Soldering iron - max 350 ºC for max 3 sec.

Soldering Surface Mount

N/A Joint Electron Device Engineering Council (JEDEC) J-STD-020C

Environmetal Endurance International Electrotechnical Commission (IEC) (68-2-3)

Temperature

N/A 40 ºC

Relative Humidity

N/A 93 %

Duration

N/A 56 days

Temperature Cycling International Electrotechnical Commission (IEC) (68-2-14)

Minimum Temperature Limit

N/A 55 ºC

Maximum Temperature Limit

N/A 85 ºC

Number of Cycles

N/A 200

Exposure Time at Each Temperature

N/A 10 min

Recovery Time Before Measurements

N/A 16 hours

Sealing

N/A Ingress Protection (IP67)

Materials

Housing Material

N/A Polyphenylene Sulfide (PPS) UL94V0

Actuator Material

N/A Polyphenylene Sulfide (PPS) UL94V0

Sealing and Spring Material

N/A Silicone Rubber

Contacts Spring Material

N/A Gold : +1μAu Silver : +3μAg Stainless Steel

Fixed Contact Material

N/A Gold : SnCu + 2μNI + 1μAu Silver : SnCu + 2μNI + 3μAg

Terminal Material

N/A SnCu + 2μNI + 3μSn100

Normally Closed (NC)/Normally Open (NO) Function

Normally Closed (NC)/Normally Open (NO) Function

N/A
  • Available for 5E and non-illuminated 5G in 3.5N actuation force.
  • Same PCB layout as the NO 5E and 5G
  • Housing color is grey

Features

Features

N/A
  • 10 Million Actuations
  • Through-hole (TH) or Surface Mount (SMD)
  • Single pole/momentary
  • Normally Open (NO) or
  • Normally Closed/Normally Open (NC/NO)
  • Through-hole Right Angle Version
  • Quiet Contact Option with 2.0N

Standard Packaging

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compatible