Print Back
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A 4600

Terminals

N/A Solder Lug Quick-Connect

Number of Poles

N/A Single

Electrical Function

N/A ON - OFF - ON

Actuator

N/A Insulated Flat Lever Standard

Actuator Color

N/A Standard Black

Approvals

N/A Underwriter Laboratories (UL)

Maximum Current Rating with Resistive Load at 250 Volts (V) Alternating Current (AC) Voltage

N/A 4 A

Maximum Current Rating with Resistive Load at 125 Volts (V) Alternating Current (AC) Voltage

N/A 6 A

Electrical Specifications

Maximum Current Voltage Rating with Resistive Load

N/A 4 A 250 VAC 6 A 125 VAC

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

N/A 1000 MΩ

Dielectric Strength

N/A 2000 Vrms 50 Hz Minimum Between Terminals 2500 Vrms 50 Hz Minimum Between Poles and Between Terminals and Frame

Electrical Life at Full Load

N/A 10000 cycles

General Specifications

Maximum Torque1 N/A 0.95 N·m0.70 ft·lb

Panel Thickness Between 2 Nuts

N/A 5 mm0.196 in

Operating Temperature

N/A -20 to 55 ºC-40 to 131 ºF

Maximum Hand Soldering Temperature for 10 Seconds (sec)

N/A 518 ºF270 ºC

Iron Diameter

N/A 3 mm0.118 in

Materials

Case Material

N/A Melamine Phenolic

Insulated Actuator Material

N/A Polyamide 6-6

Non-Insulated Actuator Material

N/A Nickel-Plated Brass

Insulated Bushing Material

N/A Polyamide 6-6

Non-Insulated Bushing Material

N/A Nickel-Plated Brass

Contact Material

N/A Silver

Distinctive Features

Distinctive Features

N/A
  • High current/voltage rating in a small case
  • Butt action contacts
  • Insulated or metal lever

Agency Approvals

Agency Approvals

N/A Canadian Standards Association (CSA®) Recognized Component Mark (RU®) Underwriters Laboratories (UL) Verb and Deutscher Elektrotechniker (VDE) (European Standards (EN) 61058-1)) Approved

Marking

N/A VDE approved models are standard marked. To order switches marked UL-CSA, complete appropriate box of ordering format.

Note

Note

N/A APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.
The company reserves the right to change specifications without notice.
  • 1 Applied to nut