Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Nippon Chemi-Con |
Manufacturer |
N/A United Chemi-Con |
Series |
N/A KZG |
Temperature Range |
N/A -40 to +105 ºC |
Working Direct Current (DC) Voltage |
N/A 6.3 V |
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature1 | N/A 0.22 % |
Capacitance |
N/A 1800 µF |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes |
N/A
I=0.01CV or 3 µA, whichever is greater. Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) |
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency |
N/A
Z (-25 ºC) / Z (+20 ºC) = 2 Z (-40 ºC) / Z (+20 ºC) = 3 |
Maximum Impedance at 100 Kilohertz (kHz) Frequency and 20 Degree Celsius (ºC) Temperature |
N/A 0.021 Ω |
Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency |
N/A 1870 mArms |
Industry Standards |
N/A Restriction of Hazardous Substances (RoHS) Compliant |
Diameter (D) |
N/A 8 mm |
Maximum Diameter (D) |
N/A 8.5 mm |
Dimension L |
N/A 20 mm |
Maximum Dimension L |
N/A 21.5 mm |
Diameter (d) |
N/A 0.6 mm |
Dimension F |
N/A 3.5 mm |
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 0.60 |
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 0.87 |
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 0.95 |
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency |
N/A 1 |
Note for Rated Ripple Current Multipliers |
N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. |
Endurance |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current for 2000 hours at 105 ºC. Capacitance change: ≤ ±25% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ The initial specified value |
Shelf Life |
N/A
The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change: ≤ ±25% of the initial value D.F. (tan δ): ≤ 200% of the initial specified value Leakage current: ≤ The initial specified value |