Print Back
Common Anode, Right Hand Decimal.

A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build-up during assembly process.
120 Milliwatt (mW) Power Dissipation (P<sub>D</sub>) Surface Mount Display
Unit of Measure
Items 120 Milliwatt (mW) Power Dissipation (P<sub>D</sub>) Surface Mount Display
XZFBGA10A
120 Milliwatt (mW) Power Dissipation (PD) Surface Mount Display
List Price {QUOTE}
62.5 Milliwatt (mW) Power Dissipation (P<sub>D</sub>) Surface Mount Display
XZFMG10A
62.5 Milliwatt (mW) Power Dissipation (PD) Surface Mount Display
List Price {QUOTE}
75 Milliwatt (mW) Power Dissipation (P<sub>D</sub>) Surface Mount Display
XZFVG07A
75 Milliwatt (mW) Power Dissipation (PD) Surface Mount Display
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0} N/A {0}
Description N/A Common Anode, Right Hand Decimal.

A Relative Humidity between 40% and 60% is recommended in ESD-protected work areas to reduce static build-up during assembly process.
Brands N/A SunLED
Manufacturer N/A SunLED
Reverse Voltage (VR) N/A 5 V
Forward Current (IF) N/A 30 mA N/A 25 mA N/A 30 mA
Forward Peak Current 1/10 Duty Cycle 0.1 Millisecond (ms) Pulse Width (iFS) N/A 100 mA N/A 140 mA N/A 150 mA
Power Dissipation (PD) N/A 120 mW N/A 62.5 mW N/A 75 mW
Operating Temperature (TA) N/A -40 ~ +85 ºC
Storage Temperature Range (TSTG) N/A -40 ~ +85 ºC
Electrostatic Discharge Threshold (HBM) N/A 1000 V N/A N/A
Lead Solder Temperature (2 Millimeter (mm) Below Package Base) N/A 260 ºC for 3 to 5 Seconds N/A N/A
Typical Forward Voltage (VF) at IF=10 Milliampere (mA) Current N/A 3.05 V N/A 2 V N/A 2 V
Maximum Forward Voltage (VF) at IF=10 Milliampere (mA) Current N/A 4 V N/A 2.4 V N/A 2.45 V
Maximum Reverse Current (IR) at VR=5 Volt (V) Voltage N/A 10 µA
Typical Wavelength of Peak Emission with CIE127-2007 (λP) at IF=10 Milliampere (mA) Current N/A 520 nm N/A 565 nm N/A 574 nm
Typical Wavelength of Dominant Emission with CIE127-2007 (λD) at IF=10 Milliampere (mA) Current N/A 530 nm N/A 568 nm N/A 570 nm
Typical Spectral Line Full Width at Half-Maximum (Δλ) at IF=10 Milliampere (mA) Current N/A 35 nm N/A 30 nm N/A 20 nm
Typical Capacitance (C) at VF=0 Volt (V) Voltage, f= 1 Megahertz (MHz) Frequency N/A 100 pF N/A 15 pF N/A 15 pF
Emitting Color N/A Green
Emitting Material N/A Indium Gallium Nitride (InGaN) N/A Gallium Phosphide (GaP) N/A Aluminum Gallium Indium Phosphide (AlGaInP)
Minimum Luminous Intensity at IF= 10 Milliampere (mA) Current N/A 21000 mcd N/A 2200 mcd N/A 3600 mcd
Minimum Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current N/A 9000 mcd N/A 560 mcd N/A 1400 mcd
Typical Luminous Intensity at IF= 10 Milliampere (mA) Current N/A 59990 mcd N/A 4690 mcd N/A 11990 mcd
Typical Luminous Intensity with CIE127-2007 at IF= 10 Milliampere (mA) Current N/A 18990 mcd N/A 1190 mcd N/A 3090 mcd
Note for Luminous Intensity and Wavelength N/A Luminous intensity value and wavelength are in accordance with CIE127-2007 standards.
Digit Height N/A 0.4 in N/A 0.4 in N/A 0.3 in
Tolerance (±) N/A 0.25 mm0.01 in
Moisture Sensitivity Level (MSL) N/A 2a
Units Per Package N/A 400 N/A 400 N/A 550
Package Type N/A Reel
Industry Standards N/A Restriction of Hazardous Substances (RoHS) Compliant
Features N/A
  • Robust package
  • Low power consumption
  • Standard configuration: Gray face white segments
  • Lead-Free
N/A
  • Robust package
  • Low power consumption
  • Standard configuration: Gray face with white segments
  • Lead-Free
N/A
  • Robust package
  • Low power consumption
  • Standard configuration: Gray face with white segments
  • Lead-Free
Note N/A
  1. Specifications are subject to change without notice.
  2. The gap between the reflector and PCB shall not exceed 0.25 mm.