PUI - Projections Unlimited, Inc. - HF Series Proportional Multi-Axis Fingertip Controllers

Unit of Measure

Items	HF4141 HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller List Price {QUOTE}	HF4142 HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller List Price {QUOTE}	HF50W18 HF Series 200 Millivolt (mV) Output Linearity (?) and 400 Millivolt (mV) Dual Output Interlinearity (X/Y) (?) Proportional Multi-Axis Fingertip Controller List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}	N/A {0}
Description	N/A Non-Contacting Hall Effect Technology
Brands	N/A APEM
Manufacturer	N/A APEM
Series	N/A HF
Operating Temperature	N/A -40 to 85 ºC-40 to 185 ºF
Storage Temperature	N/A -40 to 85 ºC-40 to 185 ºF
Above Panel Sealing¹	N/A Up to Ingress Protection (IP) 67 (subject to final specifications)	N/A Up to Ingress Protection (IP) 67 (subject to final specifications)	N/A 3 Axis Up to Ingress Protection (IP) 67 (subject to final specifications)
Extended Electromagnetic Compatibility (EMC) Immunity Level (Volt (V)/Metre (M))	N/A EN61000-4-3
Electromagnetic Compatibility (EMC) Emissions Level	N/A EN61000-6-3:2001
Electrostatic Discharge (ESD)	N/A EN61000-4-3 Level 2 (±4 kv contact, ± 6 kv air)
Output Linearity (±)	N/A 200 mV
Dual Output Interlinearity (X/Y) (±)	N/A 400 mV
Dual Output Interlinearity (Z) (±)	N/A 600 mV
Sensor	N/A Dual Hall Effect Single
Direct Current (DC) Voltage Range	N/A 5 V
Direct Current (DC) Voltage Range Tolerance (±)	N/A 0.01 V
Typical Supply Current	N/A 40 mA
Maximum Supply Current	N/A 50 mA
Maximum Reverse Polarity for Direct Current Voltage (VDC)	N/A -10
Maximum Transient Voltage for Direct Current Voltage (VDC)	N/A 16 V
Output Current	N/A 8 mA
Minimum Output Load	N/A 1 kΩ
Output Impedance	N/A 2 Ω
Shaft Material	N/A Stainless Steel
Boot Material	N/A Silicone
Handle Material²	N/A Glass Filled Nylon
Body Material	N/A Glass Filled Nylon
Break Out Force (X/Y Axis)	N/A 1.3 N0.3 lbf
Operating Force (X/Y Axis)	N/A 2.8 N0.63 lbf
Deflection Angle (X/Y Axis)	N/A 36 º
Deflection Angle From Centre (X/Y Axis) (±)	N/A 18 º
Expected Mechanical Life (X/Y Axis)	N/A 5 Million Lifecycles
Lever Action (X/Y Axis)	N/A Omnidirectional Single Spring
Break Out Force (Z Axis)	N/A 0.09 N0.80 lbf
Operating Force (Z Axis)	N/A 0.121 N1.07 lbf
Deflection Angle (Z Axis)	N/A 60 º
Deflection Angle From Centre (Z Axis)	N/A 30 º
Expected Mechanical Life (Z Axis)	N/A 5 Million Lifecycles
Handle Action (Z Axis)	N/A Spring Centering
Distinctive Features	N/A One, two or three axis Analog outputs CAN bus J1939 and CANopen options USB 2.0 HID interface options Connectorized housing
Note	N/A The company reserves the right to change specifications without notice
¹ Subject to final specifications ² Most handles, dependent upon configurations