Print Back
SMH Series 10000 Microfarad (µF) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor (ESMH101VND103MA63T)
Unit of Measure
Items SMH Series 10000 Microfarad (µF) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor (ESMH101VND103MA63T)
ESMH101VND103MA63T
SMH Series 10000 Microfarad (?F) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
List Price {QUOTE}
SMH Series 4700 Microfarad (µF) Capacitance and 30 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
ESMH101VNN472MR50T
SMH Series 4700 Microfarad (?F) Capacitance and 30 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
List Price {QUOTE}
SMH Series 6800 Microfarad (µF) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
ESMH101VSN682MA50S
SMH Series 6800 Microfarad (?F) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
List Price {QUOTE}
SMH Series 680 Microfarad (µF) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
ESMH401VNN681MA50T
SMH Series 680 Microfarad (?F) Capacitance and 35 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
List Price {QUOTE}
SMH Series 1000 Microfarad (µF) Capacitance and 40 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
ESMH451VND102MB63T
SMH Series 1000 Microfarad (?F) Capacitance and 40 Millimeter (mm) Dimension D Large Capacitance Aluminum Electrolytic Capacitor
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0} N/A {0} N/A {0} N/A {0}
Description N/A The SMH series capacitors are the standard 85 ?C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the SMH series is 2,000 hours at 85 ?C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The SMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The SMH series is RoHS compliant offering Pb-free construction. N/A The SMH series capacitors are the standard 85 ?C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the SMH series is 2,000 hours at 85 ?C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The SMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The SMH series is RoHS compliant offering Pb-free construction. N/A Non solvent resistant type N/A The SMH series capacitors are the standard 85 ?C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the SMH series is 2,000 hours at 85 ?C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The SMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The SMH series is RoHS compliant offering Pb-free construction. N/A The SMH series capacitors are the standard 85 ?C, large capacitance, snap-in capacitors from United Chemi-Con. The load life for the SMH series is 2,000 hours at 85 ?C with the rated ripple current applied. The very high CV values and ripple current capabilities make these capacitors ideal for use in power supply filter circuits. The SMH capacitors are available in 2 or 4-pin snap-in styles and 4 or 5-pin straight terminals. The SMH series is RoHS compliant offering Pb-free construction.
Brands N/A United Chemi-Con N/A United Chemi-Con N/A Nippon Chemi-Con N/A United Chemi-Con N/A United Chemi-Con
Manufacturer N/A United Chemi-Con
Series N/A SMH
Working Direct Current (DC) Voltage N/A 100 V N/A 100 V N/A 100 V N/A 400 V N/A 450 V
Capacitance N/A 10000 µF N/A 4700 µF N/A 6800 µF N/A 680 µF N/A 1000 µF
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature N/A 20 %
Dissipation Factor (Tan δ) N/A N/A N/A 0.15 N/A N/A
Maximum Equivalent Series Resistance (ESR) at 120 Hertz (Hz) Frequency, +20 Degree Celsius (ºC) Temperature N/A
Rated Ripple Current at +85 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency N/A N/A N/A 6.50 mArms N/A N/A
Temperature Range N/A -40 to +85 ºC N/A -40 to +85 ºC N/A -40 to +85 ºC N/A -25 to +85 ºC N/A -25 to +85 ºC
Endurance at 85 Degree Celsius (ºC) Temperature1 N/A N/A N/A 2000 hours N/A N/A
Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes N/A I=0.02CV 3 µA or 3 mA, whichever is smaller.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature N/A 0.15 N/A 0.15 N/A N/A 0.15 N/A 0.15
Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency N/A Impedance (Z) ratio between the -25 ºC or -40 ºC value and +20 ºC value shall not exceed the values given below.

Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 5
N/A Impedance (Z) ratio between the -25 ºC or -40 ºC value and +20 ºC value shall not exceed the values given below.

Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 5
N/A Z(-25 ºC)/Z(+20 ºC) = 2
Z(-40 ºC)/Z(+20 ºC) = 5
N/A Impedance (Z) ratio between the -25 ºC or -40 ºC value and +20 ºC value shall not exceed the values given below.

Z(-25 ºC)/Z(+20 ºC) = 4
N/A Impedance (Z) ratio between the -25 ºC or -40 ºC value and +20 ºC value shall not exceed the values given below.

Z(-25 ºC)/Z(+20 ºC) = 8
Dimension D N/A 35 mm N/A 30 mm N/A 35 mm N/A 35 mm N/A 40 mm
Dimension L N/A 63 mm N/A 50 mm N/A 50 mm N/A 50 mm N/A 63 mm
Rated Lifetime2 N/A 2000 hours N/A 2000 hours N/A N/A 2000 hours N/A 2000 hours
Terminal Type N/A Snap-in Pins N/A Snap-in Pins N/A N/A Snap-in Pins N/A Snap-in Pins
Pin Length N/A 5.8 mm N/A 5.8 mm N/A N/A 5.8 mm N/A 5.8 mm
Dummy Terminals N/A 2 Dummy Terminals N/A No Dummy Terminals N/A N/A No Dummy Terminals N/A 2 Dummy Terminals
Supplement Type N/A Pb-free PVC sleeve with end disk N/A Pb-free PVC sleeve with end disk N/A N/A Pb-free PVC sleeve with end disk N/A Pb-free PVC sleeve with end disk
Rated Ripple Current Multipliers at +45 Degree Celsius (ºC) Ambient Temperature N/A 1.73 N/A 1.73 N/A N/A 1.73 N/A 1.73
Rated Ripple Current Multipliers at +60 Degree Celsius (ºC) Ambient Temperature N/A 1.50 N/A 1.50 N/A N/A 1.50 N/A 1.50
Rated Ripple Current Multipliers at +70 Degree Celsius (ºC) Ambient Temperature N/A 1.32 N/A 1.32 N/A N/A 1.32 N/A 1.32
Rated Ripple Current Multipliers at +85 Degree Celsius (ºC) Ambient Temperature N/A 1 N/A 1 N/A N/A 1 N/A 1
Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency N/A 0.92 N/A 0.92 N/A 0.92 N/A 0.77 N/A 0.77
Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency N/A 1
Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency N/A 1.07 N/A 1.07 N/A 1.07 N/A 1.16 N/A 1.16
Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency N/A 1.13 N/A 1.13 N/A 1.13 N/A 1.30 N/A 1.30
Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency N/A 1.19 N/A 1.19 N/A 1.19 N/A 1.41 N/A 1.41
Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency N/A N/A N/A 1.20 N/A N/A
Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency N/A 1.20 N/A 1.20 N/A N/A 1.43 N/A 1.43
Note for Rated Ripple Current Multipliers N/A N/A N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current. N/A N/A
Industry Standards N/A Restriction of Hazardous Substances (RoHS) Compliant N/A Restriction of Hazardous Substances (RoHS) Compliant N/A Restriction of Hazardous Substances (RoHS) 2 Compliant N/A Restriction of Hazardous Substances (RoHS) Compliant N/A Restriction of Hazardous Substances (RoHS) Compliant
Endurance N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 85 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 85 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85 ºC.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 85 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjecting them to DC voltage for 2,000 hours at 85 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value
Shelf Life N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value
N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 85 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value
Features N/A
  • Snap Mount
  • Large Capacitance
  • High CV
  • High Ripple
  • +85 ºC Maximum Temperature
N/A
  • Snap Mount
  • Large Capacitance
  • High CV
  • High Ripple
  • +85 ºC Maximum Temperature
N/A N/A
  • Snap Mount
  • Large Capacitance
  • High CV
  • High Ripple
  • +85 ºC Maximum Temperature
N/A
  • Snap Mount
  • Large Capacitance
  • High CV
  • High Ripple
  • +85 ºC Maximum Temperature
Additional Information N/A The standard SMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products. N/A The standard SMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products. N/A N/A The standard SMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products. N/A The standard SMH series capacitors are not solvent proof. Refer to guidelines and precautions on the website for usage and installation conditions recommended for United Chemi-Con products.
Note N/A N/A N/A The standard design has no plastic disc.

Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information and product specifications.
N/A N/A
  • 1 With ripple current
  • 2 At +85 ºC with the rated ripple current applied.