PUI - Projections Unlimited, Inc. - Q14 Series Panel Mounting Light Emitting Diode (LED) Indicators

Unit of Measure

Items	Q14F1BXXHB02E Q14 Series Black Bezel Finish Panel Mounting Light Emitting Diode (LED) Indicator List Price {QUOTE}	Q14F3CZZRYG12E Q14 Series Bright Chrome Bezel Finish Panel Mounting Light Emitting Diode (LED) Indicator List Price {QUOTE}
Manufacturer Stock	N/A {0}	N/A {0}
Description	N/A
Brands	N/A APEM
Manufacturer	N/A APEM
Series	N/A Q14
Mounting Hole Diameter	N/A 14 mm
Bezel Style	N/A Flush
Terminals	N/A Solder Lug/Fastons (2.8 x 0.8)	N/A Wires
Bezel Finish	N/A Black Chrome	N/A Bright Chrome
Type of Illumination	N/A Fixed Light	N/A Tri-Color
Note for Type of Illumination	N/A	N/A Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Light Emitting Diode (LED) Color	N/A Hyper Bright Blue	N/A Green Red Yellow
Direct Current (DC) Voltage	N/A No resistor	N/A 12 V
Sealing	N/A Ingress Protection (IP67)
Operating Direct Current (DC) Voltage	N/A 1.8 to 3.3 V	N/A 10.8 to 13.2 V
Maximum Operating Direct Current (DC)	N/A 20 mA	N/A
Operating Direct Current (DC)	N/A	N/A 20 mA
Note for Operating Direct Current (DC)	N/A Customer to supply resistor for desired operating current.	N/A
Red Color Prominent Intensity	N/A	N/A 80 mcd
Yellow Color Prominent Intensity	N/A	N/A 50 mcd
Green Color Prominent Intensity	N/A	N/A 50 mcd
Red Color Flush Intensity	N/A	N/A 14 mcd
Yellow Color Flush Intensity	N/A	N/A 10 mcd
Green Color Flush Intensity	N/A	N/A 10 mcd
Red Color Forward Voltage	N/A	N/A 2 V
Yellow Color Forward Voltage	N/A	N/A 2.1 V
Green Color Forward Voltage	N/A	N/A 2.2 V
Maximum Reverse Voltage (V_R)	N/A 5 V
Viewing Angle	N/A 30 to 100 º	N/A 100 º
Note for Viewing Angle	N/A Dependent on model	N/A
Operating Temperature Range (Rear Plastic Body)	N/A -30 to 65 ºC-22 to 149 ºF	N/A
Operating Temperature Range (Rear Epoxy Body)	N/A -40 to 85 ºC-40 to 185 ºF	N/A
Operating Temperature Range	N/A	N/A -40 to 85 ºC
Torque	N/A 75 cNm	N/A
Maximum Panel Thickness	N/A 11 mm	N/A
Material	N/A Plated brass bezel finished in bright chrome, black or satin gray and molded polycarbonate rear body.	N/A
Features	N/A 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations Custom engraving available Available in RGB	N/A 10 mm colored diffused epoxy lens or 10 mm water clear super bright LED Bright chrome, black chrome or satin grey bezel finish Prominent and flush bezel styles 2 VDC to 220 VAC (2.8 x 0.8) terminals, pins or (200 mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer
Note	N/A The company reserves the right to change specifications without notice. All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations. The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated. Luminous intensities and color shades of white LEDs may vary within a batch. Luminous intensity will be reduced with lower operating current.	N/A The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice.