Request Information
PUI Audio?'s Mobile Series line of speakers and receivers is designed for cutting edge applications such as smart watches and pendants, Wi-Fi enabled security devices and action cameras, mobile radios and smart phones, as well as IoT devices. Each Mobile Series product features an IP67-rated face for protection against dust and water ingress.

The eight ohm 15 mm x 11 mm AS01508MS-SC11-WP-R speaker is designed for high fidelity audio reproduction in the thinnest size possible-only 3.5 mm thick! Spring contacts provide convenient connection.
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A PUI Audio™

Manufacturer

 N/A PUI Audio�, Inc.

Thickness

 N/A 3.5 mm

Size

 N/A 15 x 11 mm

Tolerance (±)

 N/A 0.5 mm

Angle Tolerance (±)

 N/A 3 º

Rated Input Power

 N/A 0.7 W

Maximum Input Power

 N/A 1.0 W

Impedance

 N/A 8 Ω

Impedance Tolerance (±)

 N/A 15 %

Sensitivity

 N/A 89 dB

Sensitivity Tolerance (±)

 N/A 3 dB

Testing Condition for Sensitivity

 N/A (Sound Pressure Level (SPL) at 2 V/10 cm) Average 0.8, 1.0, 1.5, 2.0 kHz

Resonant Frequency (Free Air)

 N/A 600 Hz

Resonant Frequency (Free Air) Tolerance (±)

 N/A 20 %

Frequency Range

 N/A 600 ~ 20000 Hz

Buzz, Rattle, etc.

 N/A Should not be Audible with 2 V Sine Wave from 200 Hz to 2 kHz

Polarity

 N/A When Positive Voltage is Applied to the Positive Terminal, the Diaphragm will Move Outward

Operating Temperature

 N/A -20 ~ +70 ºC

Storage Temperature

 N/A -30 ~ +80 ºC

Weight

 N/A 1.5 g

Environmental Protection

 N/A Ingress Protection (IP67)

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU

Materials

Frame Material

 N/A Polybutylene Terephthalate (PBT)

Magnet Material

 N/A Neodymium (NdFeB)

Mechanical Reliability and Environment Testing

High Temperature Test

 N/A 96 hours at +85ºC ± 3ºC followed by three hours in normal room temperature

Low Temperature Test

 N/A 96 hours at -40 ºC ± 3 ºC followed by three hours in normal room temperature

Humidity Test

 N/A 96 hours at +40 ºC ± 3 ºC with relative humidity at 90% ~ 95% followed by 6 hours in normal room temperature

Temperature Cycle Test

 N/A The part shall be subjected to 12 cycles using the following procedure:
Low temperature: -40ºC±3ºC
High temperature:+80ºC±3ºC
Cycle: 2 hours at High, 5 minutes High to Low, 2 hours at Low, 5 minutes Low to High

Vibration Test

 N/A 10-55 to 10 Hz sine sweep, per minute at 1.5 mm amplitude
2 hours in each axis X, Y, and Z.

Drop Test

 N/A Mount speaker to 100 g fixture, drop fixture 1.5 meters, twice per side and twice for each corner

Load Test

 N/A White noise is applied at the speakers rated power for 96 hours at room temperature with speaker in 1 cc enclosure.

Note for Reliability Testing

 N/A After each test, the speaker's SPL shall be ±3 dB of the original SPL

Features

Features

 N/A
  • PEEK diaphragm for flat frequency response
  • High-energy neodymium motor
  • Dustproof and waterproof IP67-rated face

Note

Note

 N/A Specifications subject to change or withdrawal without notice.