Request Information
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A American Zettler®

Manufacturer

 N/A American Zettler�

Contacts

Arrangement

 N/A Single Pole Single Throw (SPST) (1 Form A)

Maximum Switched Power Resistive Load Rating

 N/A 600 W6250 V·A

Maximum Switched Current Resistive Load Rating

 N/A 25 A
Maximum Switched Direct Current (DC) Voltage Resistive Load Rating1 N/A 150 V

Maximum Switched Alternating Current (AC) Voltage Resistive Load Rating

 N/A 250 V

Rated Load Current (Underwriter Laboratories (UL))

 N/A 25 A at 277 VAC resistive (100 k cycles) 85ºC (silver cadmium oxide] [silver tin oxide]
1 HP at 120 VAC (100 k cycles) 85ºC [silver cadmium oxide] [silver tin oxide]
2 HP at 240 VAC (100k cycles) 85ºC [silver tin oxide]
2 HP at 240 VAC (30 k cycles) 85ºC [silver cadmium oxide]

Material

 N/A Silver Cadmium Oxide Silver Tin Oxide
Initially Resistance2 N/A < 100 mΩ

General Data

Mechanical Life Expectancy (Minimum Operations)

 N/A 2 x 106

Electrical Life Expectancy (Minimum Operations)

 N/A 1 x 105 at 20 Ampere (A) and 250 Alternating Current (AC) Voltage Respectively

Operate Time (Typical)

 N/A 20 Millisecond (ms) at Nominal Coil Voltage

Release Time (Typical)

 N/A 10 Millisecond (ms) at Nominal Coil Voltage (with no Coil Suppression)

Dielectric Strength at Sea Level for 1 Minute (min)

 N/A 1000 Root Mean Square (RMS) Voltage (VRMS) Between Open Contacts 10000 Volts (V) Surge Contact to Coil 4500 Root Mean Square (RMS) Voltage (VRMS) Coil to Contact

Insulation Resistance

 N/A 1000 Megaohm (MΩ) Minute (min) at 20 Degree Celsius (ºC), 500 Direct Current (DC) Voltage 50 Percent (%) RH

Dropout

 N/A Greater than 10 Percent (%) of Nominal Coil Voltage

Operating Ambient Temperature at Nominal Coil Voltage

 N/A -40 ºC85 ºF

Storage Ambient Temperature at Nominal Coil Voltage

 N/A -40 ºC185 ºF

Vibration at 10 to 55 Hertz (Hz)

 N/A 0.062 in. DA

Operating Shock

 N/A 20 Grams (g), 11 Millisecond (ms), 1/2 sine (no False Operation)

Non-Operating Shock

 N/A 100 Grams (g), 11 Millisecond (ms), 1/2 Sine (no Damage)

Enclosure

 N/A Polybutylene Terephthalate (PBT) Polyester
Terminals3 N/A Tinned Copper Alloy Polycarbonate (PC) Quick Connect

Maximum Solder Temperature

 N/A 270 ºC518 ºF

Maximum Solder Time

 N/A 5 seconds

Approximate Weight

 N/A 23 g

Coil Specification

Power at Pickup Voltage (Typical)

 N/A 441 mW

Maximum Continuous Power Dissipation

 N/A 2.25 W

Temperature Rise

 N/A 45 ºC81 ºF

Maximum Power Temperature

 N/A 155 ºC311 ºF

Nominal Coil Direct Current (DC) Voltage

 N/A 24 V

Must Operate Direct Current (DC) Voltage

 N/A 16.8 V

Maximum Continuous Direct Current (DC) Voltage

 N/A 37.9 V

Coil Resistance (±) 10 Percent (%)

 N/A 640

Features

Features

 N/A
  • Low cost
  • 25 Amp switching
  • 80 Amp inrush current
  • Quick connect and PCB terminals
  • Flux tight construction
  • UL, CUR file E44211

Note

Note

 N/A
  1. All values at 20ºC (68ºF).
  2. Relay may pull in with less than "Must Operate" value.
  3. Specifications subject to change without notice.
  • 1 If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory
  • 2 6 V, 1 A voltage drop method
  • 3 Allow suitable slack on leads when wiring, and do not subject the terminals to excessive force.