Request Information
  • Low Profile Pushbutton Switches for Harsh Environments
  • Momentary Action
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A IA

Bushing Diameter

 N/A 16 mm

Maximum Current Rating with Resistive Load at 24 Volts (V) Direct Current (DC) Voltage

 N/A 2 A
Maximum Torque1 N/A 0.5 to 1 N·m

Environmental Specifications

Front Panel Sealing

 N/A Ingress Protection (IP65) and Ingress Protection (IP) 67 According to International Electrotechnical Commission (IEC) 60529

Salt Spray

 N/A International Electrotechnical Commission (IEC) 512-6, Test 11f

Operating Temperature

 N/A -20 to 65 ºC-4 to 149 ºF

Electrical Specifications

Initial Contact Resistance

 N/A 100 mΩ

Dielectric Strength

 N/A 500 Vrms

Electrical Life at Full Load

 N/A 1000000 cycles

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 500 MΩ

General Specifications

Maximum Panel Thickness

 N/A 7 mm0.276 in

Total Travel

 N/A 1.5 mm0.059 in

Total Travel Tolerance (±)

 N/A 0.3 mm

Typical Operating Force

 N/A 7 N

Typical Operating Force Tolerance (±)

 N/A 2 N

Low Level/Mechanical Life

 N/A 1000000 cycles

Materials

Case Material

 N/A Thermoplastic

Bushing Material

 N/A Thermoplastic

Actuator Material

 N/A Polyurethane

Contact Material

 N/A Gold Plated Silver

Multi-Wire Lead Material

 N/A American Wire Gauge (AWG), Section 0.6 mm²

Terminal Seal Material

 N/A Epoxy

Distinctive Features

Distinctive Features

 N/A
  • Resistant to frost, sand and hydrocarbons
  • Tactile feedback
  • Front panel sealed to IP65 and IP67

Note

Note

 N/A The company reserves the right to change specifications without notice.
  • 1 Applied to nut.