Request Information
Bushing ? 24 or 26 mm - momentary or latching
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A FD

Threaded Bushing Diameter

 N/A 24 mm

Actuator

 N/A Flat Round

Electrical Function

 N/A OFF - ON
Light Emitting Diode (LED) Control1 N/A Light Emitting Diode (LED) Linked to Actuator, Green if Switch in ON Position

Number of Poles

 N/A Single

Terminals

 N/A Solder Lugs

Contact Material

 N/A Gold-Plated Silver

Actuator Color

 N/A Smoke Black

Bezel Color

 N/A Black

Light Emitting Diode (LED) Color

 N/A Green Red

Light Emitting Diode (LED) Resistor Direct Current (DC) Voltage

 N/A 24 V

Symbols

 N/A START (Green) STOP (Red) with Ring

Electrical Specifications

Maximum Current Rating with Resistive Load for Silver Contacts

 N/A 4 A

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 1 GΩ

Maximum Direct Current (DC) Voltage Rating with Resistive Load for Silver Contacts

 N/A 12 V

Maximum Current Rating with Resistive Load for Gold Plated Contacts

 N/A 200 mA

Maximum Direct Current (DC) Voltage Rating with Resistive Load for Gold Plated Contacts

 N/A 12 V

Minimum Dielectric Strength

 N/A 1 Root Mean Square (RMS) Voltage (VRMS) 50 Hertz (Hz)

Momentary Models Electrical Life at Full Load (Gold Plated Contacts)

 N/A 1 Million cycles

Momentary Models Electrical Life at Full Load (Silver Plated Contacts)

 N/A 400 cycles

Latching Models Electrical Life at Full Load

 N/A 200 cycles

General Specifications

Front Panel Sealing

 N/A Ingress Protection (IP69K) According to Deutsches Institut für Normung (DIN 40050-9)

Maximum Panel Thickness

 N/A 1 to 18 mm0.039 to 0.708 in

Total Travel

 N/A 2.5 mm

Total Travel Tolerance (±)

 N/A 0.5 mm

Typical Operating Force

 N/A 8 N

Typical Operating Force Tolerance (±)

 N/A 2 N

Momentary Models Low Level/Mechanical Life

 N/A 1 Million cycles

Latching Models Low Level/Mechanical Life

 N/A 200 cycles
Maximum Torque2 N/A 3 nm

Operating Temperature Range

 N/A -40 to 75 ºC

Materials

Case Material

 N/A Polyamide (PA46)

Actuator Material

 N/A Polyamide (PA12)

Bushing Material

 N/A Polyamide (PA66)

Bezel Material

 N/A Polyamide (PA66)

Features

Features

 N/A
  • Double icon actuator
  • Snap-in and threaded bushing models
  • Suited for integrated designs
  • Large but lightweight
  • Sealed to IP69K (threaded bushing version)

Note

Note

 N/A The company reserves the right to change specifications without notice
  • 1 F and G for OFF - ON models only.
  • 2 Applied to nut