Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A Q14

Mounting Hole Diameter

N/A 14 mm

Bezel Style

N/A Flush

Terminals

N/A Solder Lug/Fastons (2.8 x 0.8)

Bezel Finish

N/A Black Chrome

Type of Illumination

N/A Fixed Light

Light Emitting Diode (LED) Color

N/A Hyper Bright Blue

Direct Current (DC) Voltage

N/A No resistor

Sealing

N/A Ingress Protection (IP67)

Operating Direct Current (DC) Voltage

N/A 1.8 to 3.3 V

Maximum Operating Direct Current (DC)

N/A 20 mA

Note for Operating Direct Current (DC)

N/A Customer to supply resistor for desired operating current.

Maximum Reverse Voltage (VR)

N/A 5 V

Viewing Angle

N/A 30 to 100 º

Note for Viewing Angle

N/A Dependent on model

Torque

N/A 75 cNm

Maximum Panel Thickness

N/A 11 mm

Operating Temperature Range

Operating Temperature Range (Rear Plastic Body)

N/A -30 to 65 ºC-22 to 149 ºF

Operating Temperature Range (Rear Epoxy Body)

N/A -40 to 85 ºC-40 to 185 ºF

Materials

Material

N/A Plated brass bezel finished in bright chrome, black or satin gray and molded polycarbonate rear body.

Features

Features

N/A
  • 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs
  • Prominent and flush bezel styles
  • (2.8 x 0.8) solder lug/faston terminals, pins or (200 mm long) wire terminations
  • Custom engraving available
  • Available in RGB

Note

Note

N/A The company reserves the right to change specifications without notice.

All LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal and subject to variations.
  • The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
  • Luminous intensity is measured at 20 mA on a discrete led unless otherwise stated.
  • Luminous intensities and color shades of white LEDs may vary within a batch.
  • Luminous intensity will be reduced with lower operating current.