Request Information
Momentary or latching
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A FP

Threaded Bushing Diameter

 N/A 30 mm

Actuator

 N/A Curved Round

Electrical Function

 N/A OFF - ON

Light Emitting Diode (LED) Control

 N/A Independent

Number of Poles

 N/A Double

Terminals

 N/A Solder Lugs

Contact Material

 N/A Gold Plated Silver Plated

Actuator Color

 N/A Black

Bezel Color

 N/A Black

Light Emitting Diode (LED) Color

 N/A Green

Light Emitting Diode (LED) Resistor Direct Current (DC) Voltage

 N/A 24 V

Marking

 N/A Laser

Symbols

 N/A ON

Electrical Specifications

Maximum Current Rating with Resistive Load for Silver Contacts

 N/A 4 A

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 1 GΩ

Maximum Direct Current (DC) Voltage Rating with Resistive Load for Silver Contacts

 N/A 12 V

Maximum Current Rating with Resistive Load for Gold Plated Contacts

 N/A 200 mA

Maximum Direct Current (DC) Voltage Rating with Resistive Load for Gold Plated Contacts

 N/A 12 V

Minimum Dielectric Strength

 N/A 1 Root Mean Square (RMS) Voltage (VRMS) 50 Hertz (Hz)

Momentary Models Electrical Life at Full Load (Gold Plated Contacts)

 N/A 1 Million cycles

Momentary Models Electrical Life at Full Load (Silver Plated Contacts)

 N/A 400 cycles

Latching Models Electrical Life at Full Load

 N/A 200 cycles

Light Emitting Diode (LED) Component Specifications

Forward Current

 N/A 20 mA

Typical Forward Voltage

 N/A 2.1 V

Maximum Forward Voltage

 N/A 2.5 V

General Specifications

Maximum Panel Thickness

 N/A 1 to 9 mm0.039 to 0.354 in

Total Travel

 N/A 2.8 mm

Total Travel Tolerance (±)

 N/A 0.5 mm

Typical Operating Force

 N/A 8 N

Typical Operating Force Tolerance (±)

 N/A 2 N

Momentary Models Low Level/Mechanical Life

 N/A 1 Million cycles

Latching Models Low Level/Mechanical Life

 N/A 200 cycles

Maximum Torque

 N/A 2 nm

Operating Temperature Range

 N/A -40 to 75 ºC-40 to 167 ºF

Materials

Case Material

 N/A Polyamide (PA46)

Actuator Material

 N/A Gloss Finish Polyamide (PA12)

Bushing Material

 N/A Gloss Finish Acrylonitrile Butadiene Styrene (ABS)

Bezel Material

 N/A Gloss Finish Acrylonitrile Butadiene Styrene (ABS)

Distinctive Features

Distinctive Features

 N/A Full actuator or symbol illumination
Snap-in and threaded bushing models
Large but lightweight
Pad printed or laser etched symbols

Note

Note

 N/A APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.

The company reserves the right to change specifications without notice.