Request Information
  • High heat resistance
  • Lower ESR, Higher ripple current
  • Suitable to fit for automotive equipment
  • Solvent resistant type except 63 to 100 Vdc
  • Vibration resistant structure
  • AEC-Q200 compliant
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Nippon Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A Alchip™-MVH

Working Direct Current (DC) Voltage

 N/A 100 V
Capacitance1 N/A 22 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 0.55 Ω

Maximum Equivalent Series Resistance (ESR) at 100 Kilohertz (kHz) Frequency, -40 Degree Celsius (ºC) Temperature

 N/A 35 Ω

Rated Ripple Current at 125 Degree Celsius (ºC) Temperature, 100 Kilohertz (kHz) Frequency

 N/A 115 mArms

Temperature Range

 N/A -40 to +125 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

 N/A I=0.01CV or 3 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 0.10

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Z(-25 ºC)/Z(+20 ºC) = 2 Z(-40 ºC)/Z(+20 ºC) = 3

Mounting Style

 N/A Surface Mount

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Dimension D

 N/A 10 mm

Dimension L

 N/A 10 mm

Dimension L Tolerance (±)

 N/A 0.5 mm

Dimension A

 N/A 10.3 mm

Dimension B

 N/A 10.3 mm

Dimension C

 N/A 11 mm

Dimension W

 N/A 0.7 to 1.1 mm

Dimension P

 N/A 4.5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 0.93

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 0.97

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 1

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

 N/A 1

Note for Rated Ripple Current Multipliers

 N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after the rated voltage is applied for the specified time at 125 ºC.

Time: 2,000 hours
Capacitance change: ≤ ±30% of the initial value
D.F. (tan δ): ≤ 300% of the initial value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 125 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±30% of the initial value
D.F. (tan δ): ≤ 300% of the initial value
Leakage current: ≤ The initial specified value

Note

Note

 N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.
  • 1 Assembly boards with the designated products attached cannot be cleaned.