Request Information
  • Long life snap-ins
  • For solar power generation
  • Downsized from LXQ series
  • Non solvent resistant type
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Nippon Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A LXS

Working Direct Current (DC) Voltage

 N/A 450 V

Capacitance

 N/A 120 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Dissipation Factor (Tan δ)

 N/A 0.20

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

 N/A 0.81 mArms

Temperature Range

 N/A -25 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 5 Minutes

 N/A I ≤3√CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Z(-25 ºC)/Z(+20 ºC) = 8
Endurance at 105 Degree Celsius (ºC) Temperature1 N/A 5000 hours

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) 2 Compliant

Dimensions

Diameter (D)

 N/A 25.4 mm

Dimension L

 N/A 25 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency

 N/A 0.77

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 1

Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency

 N/A 1.16

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 1.30

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 1.41

Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency

 N/A 1.43

Note for Rated Ripple Current Multipliers

 N/A The deterioration of aluminum electrolytic capacitors accelerates their life due to the internal heating produced by ripple current.

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105 ºC.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±15% of the initial value
D.F. (tan δ): ≤ 150% of the initial value
Leakage current: ≤ The initial specified value

Note

Note

 N/A The standard design has no plastic disc.

Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained in product specifications.
  • 1 With ripple current