The U32D series allows for extremely high ripple currents for applications such as inverter designs and motor controllers. This series of capacitors offers very large capacitance of up to 2.2F and a maximum temperature rating of +105 ?C which allows a high operating temperature without sacrificing life. These capacitors are available with a variety of high current English or Metric thread terminals. Mounting options available are a three-footed clamp or bottom stud. (A special order two-footed clamp is also available for selected diameters.)
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A United Chemi-Con

Manufacturer

N/A United Chemi-Con

Series

N/A U32D

Working Direct Current (DC) Voltage

N/A 50 V

Direct Current Surge Voltage (SVDC)

N/A 63 V

Capacitance

N/A 100000 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

N/A 20 %

Maximum Equivalent Series Resistance (ESR) at +25 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

N/A 6.8 mΩ

Rated Ripple Current at +85 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

N/A 31.43 Arms

Temperature Range

N/A -40 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 2 Minutes

N/A I = 0.02CV (µA) or 5 mA, whichever is smaller, after 5 minutes at +25 ºC.
Where I = Max. leakage current (µA), C = Nominal capacitance (µF) and V= Rated voltage (V)

Rated Lifetime

N/A 2000 hours

Note for Rated Lifetime

N/A At 105 ºC with rated ripple current applied.

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

N/A 2.500 in63.5 mm

Diameter (D) Tolerance (+)

N/A 0.080 in2 mm

Dimension L

N/A 4.125 in105 mm

Dimension L Tolerance (±)

N/A 0.040 in1 mm

Dimension F

N/A 1.125 in28.6 mm

Dimension F Tolerance (±)

N/A 0.010 in0.25 mm

Thread Size

N/A 10-32 NF-2B

Minimum Thread Depth

N/A 0.375 in9.5 mm

Dimension J

N/A 0.250 in6.4 mm

Dimension J Tolerance (±)

N/A 0.020 in0.50 mm

Dimension H

N/A 4.375 in111.4 mm

Dimension H Tolerance (±)

N/A 0.080 in2 mm

Dimension S

N/A 0.313 in8 mm

Dimension S Tolerance (±)

N/A 0.010 in0.25 mm

Dimension T

N/A 0.438 in11.1 mm

Dimension T Tolerance (±)

N/A 0.010 in0.25 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at ≤ +45 Degree Celsius (ºC) Ambient Temperature

N/A 1.41

Rated Ripple Current Multipliers at +65 Degree Celsius (ºC) Ambient Temperature

N/A 1.29

Rated Ripple Current Multipliers at +85 Degree Celsius (ºC) Ambient Temperature

N/A 1

Rated Ripple Current Multipliers at +105 Degree Celsius (ºC) Ambient Temperature

N/A 0.57

Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency

N/A 0.95

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

N/A 1

Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency

N/A 1.03

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

N/A 1.05

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

N/A 1.09

Rated Ripple Current Multipliers at 50 Kilohertz (kHz) Frequency

N/A 1.12

Endurance (Load Life)

Endurance (Load Life)

N/A The following specifications shall be satisfied when the capacitors are restored to +25 ºC after subjecting them to DC voltage for 2,000 hours at +105 ºC with the rated ripple current applied. The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of the capacitors.
Capacitance change: ≤ 20% from initial measurement
ESR change : ≤ 200% of initial specified limit
Leakage current : ≤ initial specified limit

Shelf Test

Shelf Test

N/A The following specifications shall be satisfied when the capacitors are restored to +25 ºC after exposing them for 500 hours at +105 ºC without voltage applied. The rated voltage shall be applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than 48 hours before the measurements.
Capacitance change: ≤ 20% from initial measurement
ESR change : ≤ 200% of initial specified limit
Leakage current : ≤ initial specified limit

Features

Features

N/A
  • Large Can
  • Screw Terminals
  • High Ripple
  • Screw terminals: high and low post, English and Metric thread.

Additional Information

Additional Information

N/A All case size dimensions are based on inches. Custom designs are available upon request.