Request Information
Solvent resistant type except 350 to 450 Vdc
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Nippon Chemi-Con

Manufacturer

 N/A United Chemi-Con

Series

 N/A KMG

Working Direct Current (DC) Voltage

 N/A 6.3 V

Capacitance

 N/A 3300 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 20 %

Dissipation Factor (Tan δ)

 N/A 0.38

Rated Ripple Current at 105 Degree Celsius (ºC) Temperature, 120 Hertz (Hz) Frequency

 N/A 840 mArms

Temperature Range

 N/A -55 to +105 ºC

Leakage Current at 20 Degree Celsius (ºC) Temperature After 1 Minute

 N/A I=0.03CV or 4 µA, whichever is greater.
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)

Maximum Impedance Ratio Low Temperature Characteristics at 120 Hertz (Hz) Frequency

 N/A Z(-25 ºC)/Z(+20 ºC) = 5
Z(-40 ºC)/Z(+20 ºC) = 12
Endurance at 105 Degree Celsius (ºC) Temperature1 N/A 1000 to 2000 hours

Industry Standards

 N/A Restriction of Hazardous Substances (RoHS) Compliant

Dimensions

Diameter (D)

 N/A 10 mm

Maximum Diameter (D)

 N/A 10.5 mm

Dimension L

 N/A 20 mm

Maximum Dimension L

 N/A 21.5 mm

Diameter (d)

 N/A 0.6 mm

Dimension F

 N/A 5 mm

Rated Ripple Current Multipliers

Rated Ripple Current Multipliers at 50 Hertz (Hz) Frequency

 N/A 0.85

Rated Ripple Current Multipliers at 120 Hertz (Hz) Frequency

 N/A 1

Rated Ripple Current Multipliers at 300 Hertz (Hz) Frequency

 N/A 1.03

Rated Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency

 N/A 1.05

Rated Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency

 N/A 1.08

Rated Ripple Current Multipliers at 100 Kilohertz (kHz) Frequency

 N/A 1.08

Note for Rated Ripple Current Multipliers

 N/A The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 ºC rise. When long life performance is required in actual use, the rms ripple current has to be reduced.

Endurance

Endurance

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 1,000 hours (2,000 hours to meet the following two conditions
  1. 160Vdc and larger
  2. Ø12.5 and larger) at 105 ºC.
Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Shelf Life

Shelf Life

 N/A The following specifications shall be satisfied when the capacitors are restored to 20 ºC after exposing them for 1,000 hours at 105 ºC without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.

Capacitance change: ≤ ±20% of the initial value
D.F. (tan δ): ≤ 200% of the initial specified value
Leakage current: ≤ The initial specified value

Note

Note

 N/A Product specifications are subject to change without notice. Request our product specifications before purchase and/or use. Please use our products based on the information contained product specifications.
  • 1 With ripple current