Unit of Measure
Items
DM Series 0.137 Inch (in) Single Pole Single Throw (SPST) Standard Dip Switch

DM Series 0.137 Inch (in) Single Pole Single Throw (SPST) Standard Dip Switch
List Price {QUOTE}

DM Series 1.237 Inch (in) Single Pole Single Throw (SPST) Standard Dip Switch

DM Series 1.237 Inch (in) Single Pole Single Throw (SPST) Standard Dip Switch
List Price {QUOTE}
Manufacturer Stock N/A {0} N/A {0}
Description N/A
Brands N/A APEM
Manufacturer N/A APEM
Series N/A DM
Dimension A N/A 3.48 mm0.137 in N/A 31.42 mm1.237 in
Dimension A Tolerance (±) N/A 0.008 mm
Electrical Life N/A 2000 cycles minimum per switch at 24 VDC, 25 mA
Non-Switching Contact Rating Current at 50 Direct Current Voltage (VDC) N/A 100 mA
Contact Rating Switching Current at 24 Volts (V) Direct Current (DC) Voltage N/A 25 mA
Maximum Initial Contact Resistance at 100 Milliampere (mA) Current N/A 50 mΩ
After Life Test Maximum Contact Resistance at 100 Milliampere (mA) Current N/A 100 mΩ
Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage N/A 100 MΩ
Dielectric Strength Alternating Current (AC) Voltage Per 1 Minute (min) N/A 500 V
Capacitance1 N/A 5 pF
Mechanical Life N/A 2000 cycles minimum per switch
Maximum Operating Force N/A 1000 g
Vibration N/A 10 to 55 Hz. per MIL-STD-202F METHOD 201A
Shock N/A 50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B
Operating Temperature Range N/A -20 to 85 ºC
Maximum Hand Soldering Temperature for 2 Seconds (s)2 N/A 350 ºC
Maximum Wave Soldering Temperature for 5 Seconds (s) N/A 260 ºC
Cleaning with Tape Seal N/A Spray wash from top side only
Base Material N/A DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black
Cover Material N/A DM: UL94V-0, Glass Fiber Filled PPS, Black NDI: UL94V-0, Glass Fiber Filled PBT, Black
Actuator Material N/A UL94V-O, Nylon, White
Contact Material N/A Gold over Nickel Plated Copper Alloy
Terminals Material N/A Gold Plated Brass
Terminal Seal Material N/A Molded-in
Tape Seal Material N/A Kapton
Packaging N/A DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
Tape & reel packaging per EIA available for DMR models.
Features N/A
  • High reliability.
  • Self-cleaning contacts.
  • Multi- positions.
  • Process compatible with tape seal.
  • Dual in-line 0.100" x 0.300" term. spacing.
Note N/A Specifications Subject to Change Without Notice.

keep switches in "OFF" position during soldering and cleaning for best results
  • 1 Maximum between adjacent terminals
  • 2 30 watt iron max.