For P.C. board and heat sink mounting.
  • Integrally molded heat sink
  • Provides low thermal resistance
  • Space saving in-line design
Unit of Measure

Specifications

Available

Manufacturer Stock

Brands

 EDI®

Manufacturer

 EDI�

Peak Reverse Voltage (PRV) per Leg

 600 V

Number of Phase

 1

Rectifier Type

 Full Wave Bridge

Industry Standards

 Recognized Component Mark (RU®) Underwriters Laboratories (UL)

Electrical Characteristics Per Leg (at TA=25 Degree Celsius (ºC) Temperature Unless Otherwise Noted)

Average Output Current (Io) at 65 Degree Celsius (ºC) Temperature1 10 A

Maximum Forward Voltage Drop (Vf) at Forward Current (If) = 2.5 Ampere (A)

 1 V

Maximum Direct Reverse Current (IR) at Peak Reverse Voltage (PRV)

 10 µA

Maximum Direct Reverse Current (IR) at Peak Reverse Voltage (PRV) and 100 Degree Celsius (ºC) Temperature

 300 µA

Maximum Peak Surge Current at IFSM (8.3 Millisecond (ms) Time))

 300 A

Typical Thermal Resistance (Rθj-c)

 4.5 ºC/W

Ambient Operating Temperature Range (TA)

 -55 to +150 ºC

Storage Temperature Range (TSTG)

 -55 to +150 ºC

Note

Note

 Maximum lead and terminal temperature for soldering, 3/8 inch from case 5 seconds at 250 ºC.

EDI® reserves the right to change these specifications at any time without notice.
  • 1 Derate Io by 20 % for capacitive loads.