Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A APEM

Manufacturer

N/A APEM

Series

N/A TP

Number of Poles

N/A Single

Electrical Function

N/A OFF - Momentary (Mom)

Terminals

N/A Vertical Mounting Right Angle

Special Options

N/A Extended Terminals

Crimping of Ground Plate Pins

N/A Retains switch on PC during handling and wave soldering.

Electrical Specifications

Maximum Alternating Current (AC)/Direct Current (DC) Voltage with Resistive Load

N/A 20 V

Maximum Current Rating with Resistive Load

N/A 0.4 V·A

Minimum Load

N/A 10 mA 50 mV to 10 µA 5 VDC

Maximum Contact Resistance

N/A 50 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

N/A 1 MΩ

Dielectric Strength

N/A 1.000 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals and frame 500 Root Mean Square (RMS) Voltage (VRMS) 50 Hz minimum between terminals

Electrical Life at Full Load

N/A 60 cycles

General Specifications

Total Travel

N/A 0.8 mm0.031 in

Maximum Pull-Out Force Strength of Terminals

N/A 10 N

Operating Temperature

N/A -30 to 85 ºC
Moisture1 N/A 21 Days

Cleaning

N/A Solvents or Water + Detergent

Wave Soldering Temperature for 5 Seconds (s)

N/A 260 ºC

Materials

Case Material

N/A Polybutylene Terephthalate (PBT)

Actuator Material

N/A Glass Filled Polyamide

Contact Material

N/A Gold Plated Brass

Terminal Material

N/A Gold Plated Brass

Terminal Seal Material

N/A Epoxy

Features

Features

N/A
  • Process sealed
    • Single piece case
    • O-ring seal between actuator and bushing
    • Epoxy sealed terminals
  • Wide variety of contact materials
  • Same PCB layout as TL, TR and TG tiny switches
  • 1 95% (NFC 20-603 - IEC 68-2-3)