Request Information
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A IX

Bushing Diameter

 N/A 12 mm

Maximum Solder Temperature

 N/A 320 ºC608 ºF

Environmental Specifications

Operating Temperature

 N/A -40 to 85 ºC-40 to 185 ºF

Front Panel Sealing

 N/A Ingress Protection (IP67) According to International Electrotechnical Commission (IEC) 60529 Ingress Protection (IP69K) According to Director Identification Number (DIN) 40050-9

Shock Resistance

 N/A 100 g according to IEC 512-4, test 6c

Salt Spray

 N/A International Electrotechnical Commission (IEC) 512-6, Test 11f

Ultraviolet (UV) Resistant Membrane

 N/A ISO 4892-2 : 2013 ; method A, cycle 1 ; 750h

Electrical Specifications

Maximum Current Voltage Rating with Resistive Load Gold Plated Brass Contacts (0)1 N/A 100 mA 28 VDC, 1,000,000 cycles
Maximum Current Voltage Rating with Resistive Load for Silver Contacts (1)2 N/A 2 A 28 VDC, 100,000 cycles

Initial Contact Resistance

 N/A 100 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 1 GΩ

Dielectric Strength

 N/A 1500 Vrms

Contact Bounce

 N/A 10 ms

General Specifications

Panel Thickness

 N/A 2 to 8 mm

Total Travel

 N/A 2 mm0.78 in

Total Travel Tolerance (±)

 N/A 0.3 mm

Typical Operating Force

 N/A 7 N

Typical Operating Force Tolerance (±)

 N/A 3 N

Low Level/Mechanical Life

 N/A 1000000 cycles

Torque

 N/A 0.55 N·m
Maximum Torque3 N/A 0.6 N·m

Materials

Case Material

 N/A Thermoplastic UL94-V0

Actuator Material

 N/A Silicone

Bushing Material

 N/A Acrylonitrile Butadiene Styrene (ABS) UL94 HB

Contact Material

 N/A Brass Gold Plated

Output Wires Material

 N/A American Wire Gauge (AWG) 24, section 0.23 mm² - 500 mm

Terminal Seal Material

 N/A Epoxy

Distinctive Features

Distinctive Features

 N/A
  • Backlighted marking in a compact case
  • Strong tactile feedback
  • momentary NO or NC/NO
  • High sealing level, no space between actuator and
  • bushing (IP67/IP69K)

Note

Note

 N/A The company reserves the right to change specifications without notice.

APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.
  • 1 For W terminals, current has to be limited to 400 mA.
  • 2 For W terminals, current has to be limited to 400 mA.
  • 3 Applied to nut