Request Information
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Mounting Type

 N/A Through-Hole

Actuation Force

 N/A 2.0 N

Environmental Specifications

Sealing

 N/A Ingress Protection (IP67) According to International Electrotechnical Commission (IEC) 60529

Working and Storage Temperature

 N/A -40 to 160 ºC-40 to 320 ºF

Soldering Through-Hole

 N/A International Electrotechnical Commission (IEC) 60068-2-20 8

Soldering Surface Mount

 N/A Joint Electron Device Engineering Council (JEDEC) J-STD-020E

Electrical Specifications

Recommended Current at 24 Volts (V) Direct Current (DC) for Gold Contacts

 N/A 0.5 μ to 50 mA

Recommended Current at 24 Volts (V) Direct Current (DC) for Silver Contacts

 N/A 0.5 to 50 mA

Contact Resistance

 N/A < 30 mΩ

Typical Contact Resistance

 N/A 10 mΩ

Insulation Resistance

 N/A > 10 MΩ

Contact Bounce

 N/A < 2 mΩ

Typical Contact Bounce

 N/A 0.5 ms

Mechanical Specifications

Momentary Normal Opened (NO) Standard Actuation Force

 N/A 2 N3.5 N6.5 N

Standard Quite Version Actuation Force

 N/A 2 N

Standard Actuation Force (Normally Closed (NS)/Normally Open (NO) Function)

 N/A 3.5 N

Momentary Maximum Actuation Force for 60 Seconds (sec) Time

 N/A 115 N

Maximum Actuation Force for 10 Seconds (sec) (Normally Closed (NS)/Normally Open (NO))

 N/A 10 N

Travel

 N/A 1 mm

Lifetime Normally Opened (NO)

 N/A > 10000000 cycles

Lifetime Normally Closed (NS)/Normally Open (NO)

 N/A > 1000000 cycles

Materials

Housing Material

 N/A Polyphenylene Sulfide (PPS) UL94V0

Actuator Material

 N/A Polyphenylene Sulfide (PPS) UL94V0

Sealing Material

 N/A Silicone Rubber

Contacts Spring Material

 N/A Gold : +1μAu Silver : +3μAg Stainless Steel

Fixed Contact Material

 N/A Gold : SnCu + 2μNI + 1μAu Silver : SnCu + 2μNI + 3μAg

Terminal Material

 N/A SnCu + 2µNI + 3µSn100

Distinctive Features

Distinctive Features

 N/A
  • Momentary switches with NO or NC/NO function
  • Sealed to IP67
  • Robust
  • Anti-rotation thanks to Snap-On cap retention system

Note

Note

 N/A The company reserves the right to change specifications without notice.

All tolerance if not otherwise specified ±0.2 mm.