Request Information
  • Slip-on cap retention system
  • Integrated chip-LEDs
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM Illumec™

Manufacturer

 N/A APEM

Dimensions

Length

 N/A 10 mm

Width

 N/A 10 mm

Height

 N/A 10.4 mm

Environmental Specifications

Switch Sealing

 N/A Internet Protocol (IP67) according to International Electrotechnical Commission (IEC) 60529

Working Temperature

 N/A -30 ºC

Storage Temperature

 N/A 85 ºC

Soldering Through-Hole

 N/A International Electrotechnical Commission (IEC) 60068-2-20 8

Soldering Surface Mount

 N/A Joint Electron Device Engineering Council (JEDEC) J-STD-020C

Electrical Specifications

Recommended Current at 24 Volts (V) Direct Current (DC) for Gold Contacts

 N/A 0.5 μ to 50 mA

Recommended Current at 24 Volts (V) Direct Current (DC) for Silver Contacts

 N/A 0.5 to 50 mA

Contact Resistance

 N/A <30 mΩ

Typical Contact Resistance

 N/A 10 mΩ

Insulation Resistance

 N/A >10 MΩ

Contact Bounce

 N/A <2 ms

Typical Contact Bounce

 N/A 0.5 ms

Mechanical Specifications

Standard Actuation Force

 N/A 3.5 N

Maximum Actuation Force for 10 Seconds (sec)

 N/A 100 N

Travel

 N/A 1 mm

Lifetime

 N/A >10,000,000 Cycles

Materials

Housing Material

 N/A Polyphenylene Sulfide (PPS) UL94V0

Actuator Material

 N/A Polyphenylene Sulfide (PPS) UL94V0

Sealing Material

 N/A Silicone Rubber

Contacts Spring Material

 N/A Gold : +1µAu Silver : +3µAg Stainless Steel

Fixed Contact Material

 N/A Gold : SnCu + 2µNI + 1µAu Silver : SnCu + 2µNI + 3µAg

Terminal Material

 N/A SnCu + 2µNI + 3µSn100

Distinctive Features

Distinctive Features

 N/A
  • Illumination with integrated chip-LEDs
  • Single or bi-color illumination
  • Momentary NO
  • Simple slip-on cap retention system

Note

Note

 N/A The company reserves the right to change specifications without notice.

All tolerance if not otherwise specified ±0.2mm.