Request Information
  • 2 and 3-pole configurations
  • Rugged version : 100.000 cycle mechanical life
  • Locked/unlocked status indicator
  • Lower behind-panel depth
  • Sealed to IP65, IP67 and IP69K
  • Complies with EN 60947-5-1
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A APEM

Manufacturer

 N/A APEM

Series

 N/A ES

Electrical Function

 N/A 2 Normally Closed (NC) (Double Pole Only) Push-Pull ON-ON

Terminals

 N/A Solder Lug

Number of Poles

 N/A Double

Actuator Diameter

 N/A 34.5 mm1.358 in

Actuator Color

 N/A Red Anodized

Bushing Color

 N/A Yellow Anodized

Status Indicator

 N/A Green

Electrical Specifications

Current Rating

 N/A 1 A

Direct Current (DC) Voltage Rating

 N/A 24 V

Direct Current (DC) Rating

 N/A 14 A

Electrical Life

 N/A 6.050 cycles

Maximum Contact Resistance

 N/A 10 mΩ

Minimum Insulation Resistance at 500 Volt (V) Direct Current (DC) Voltage

 N/A 1 MΩ

Minimum Dielectric Strength

 N/A 1 Root Mean Square (RMS) Voltage (VRMS) 50 Hertz (Hz) Between Terminals 2 Root Mean Square (RMS) Voltage (VRMS) 50 Hertz (Hz) Between Poles and Between Terminals and Frame

Environmental Specifications

Sealing

 N/A Ingress Protection (IP65), Ingress Protection (IP67) and Ingress Protection (IP69K) According to International Electrotechnical Commission (IEC) 60529 and Deutsches Institute für Normung (DIN) 40050

Salt Spray

 N/A 96 Hours According to International Electrotechnical Commission (IEC) 68-2-11

Vibration

 N/A 10 to 500 Hertz (Hz) - 10 Gram (g) According to International Electrotechnical Commission (IEC 68-2-6)

Shock Resistance

 N/A 50 g according to IEC 68-2-27

Robustness (Axial)

 N/A IK10

Operating Temperature Range

 N/A -40 to 85 ºC

General Specifications

Maximum Panel Thickness

 N/A 6 mm0.236 in

Low Level/Mechanical Life

 N/A 100 cycles

Travel to Lock

 N/A 2.20 mm

Travel to Lock Tolerance (±)

 N/A 0.3 mm

Total Travel

 N/A 4.20 mm

Total Travel Tolerance (±)

 N/A 0.3 mm
Minimum Torque1 N/A 5 N·m

Maximum Torque

 N/A 14 nm

2 Pole Models Operating Push Force

 N/A 30 N

2 Pole Models Operating Push Force Tolerance (±)

 N/A 7 N

3 Pole Models Operating Push Force

 N/A 45 N

3 Pole Models Operating Push Force Tolerance (±)

 N/A 7 N

2 Pole Models Operating Pull Force

 N/A 25 N

2 Pole Models Operating Pull Force Tolerance (±)

 N/A 5 N

3 Pole Models Operating Pull Force

 N/A 25 N

3 Pole Models Operating Pull Force Tolerance (±)

 N/A 5 N

Materials

Case Material

 N/A Diallyl Phthalate (DAP)

Actuator Material

 N/A Red Anodized Aluminum

Bushing Material

 N/A Yellow Anodized Aluminum

Contacts Material

 N/A Gold-Plated Silver

Terminal Seal Material

 N/A Epoxy

Note

Note

 N/A The hole in the bushing is designed for insertion of a Ø 2 mm metal rod helping to fasten the switch on the panel.
  • 1 Applied to nut