• 36 mm diameter speaker with Neodymium magnet for 85 dB sensitivity
  • 0.5 W continuous, 1 W maximum power handling and 8 ? impedance
  • Mylar? cone for linear frequency response and moisture resistance
  • Less than 5 mm (1/4") thick for space-limited applications
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio�, Inc.

Diameter

N/A 36 mm

Diameter Tolerance (±)

N/A 0.2 mm

Angle Tolerance (±)

N/A 3 º

Rated Input Power

N/A 0.8 W

Maximum Input Power

N/A 1.0 W

Impedance

N/A 8 Ω

Impedance Tolerance (±)

N/A 15 %

Sound Pressure Level (SPL) Output

N/A 85 dBA

Sound Pressure Level (SPL) Output Tolerance (±)

N/A 3

Testing Condition for Sound Pressure Level (SPL) Output

N/A Sound Pressure Level (SPL) at 1 W/0.5 M (At 0.6, 0.8, 1.0, 1.2 kHz)

Maximum Distortion

N/A 5 %

Resonant Frequency

N/A 450 Hz

Resonant Frequency Tolerance (±)

N/A 20 %

Frequency Range

N/A 450 ~ 20000 Hz

Housing Material

N/A Metal

Cone Material

N/A Mylar®

Operating Temperature

N/A -20 ~ +50 ºC

Weight

N/A 8.5 g

Industry Standards

N/A Conflict-Free Sourcing Initiative (CFSI) Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Restriction of Hazardous Substances (RoHS) 2002/95/EC

Materials

Magnet Material

N/A Neodymium (N35)

Mechanical Reliability and Environment Testing

High Temperature Test

N/A 60ºC with random humidity for 96 hours

Low Temperature Test

N/A -30 ºC with random humidity for 96 hours

Humidity Test

N/A 40ºC with 90% to 95% relative humidity for 96 hours

Power Test

N/A 1 W white noise signal for 96 hours

Temperature Cycle Test

N/A -25ºC to 60ºC, five 60 minute cycles

Drop Test

N/A 75 cm free fall onto 5 mm thick board, 10 cycles

Note for Mechanical and Environment Testing

N/A After tests, speaker shall rest for 1 hours. SPL shall not deviate ±3 dB from pre-test measurement.

Note

Note

N/A Specifications subject to change or withdrawal without notice.