PUI Audio?'s Mobile Series line of speakers and receivers is designed for cutting-edge applications such as smart watches and pendants, Wi-Fi enabled security devices and action cameras, mobile radios and smart phones, as well as IoT devices. Each Mobile Series product features an IP67-rated face for protection against dust and water ingress.

The six-ohm 15 mm x 11 mm AS01506MS-SC15-WP-2-R speaker is designed for high fidelity audio reproduction in the thinnest size possible. Spring contacts and a 2.5 mm thickness make mounting easy.
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio�, Inc.

Thickness

N/A 2.5 mm

Size

N/A 15 x 11 mm

Tolerance (±)

N/A 0.5 mm

Angle Tolerance (±)

N/A 3 º

Rated Input Power

N/A 1 W

Maximum Input Power

N/A 1.2 W

Impedance

N/A 6 Ω

Impedance Tolerance (±)

N/A 20 %

Sensitivity

N/A 93 dB

Sensitivity Tolerance (±)

N/A 3 dB

Testing Condition for Sensitivity

N/A (Sound Pressure Level (SPL) at 2.45 V/10 cm) at 2 kHz in 1 cc enclosure

Resonant Frequency (Free Air)

N/A 650 Hz

Resonant Frequency (Free Air) Tolerance (±)

N/A 20 %

Resonant Frequency in 1 Cubic Centimeter (cm³) Enclosure

N/A 950 Hz

Resonant Frequency Tolerance (±) in 1 Cubic Centimeter (cm³) Enclosure

N/A 20 %

Frequency Range

N/A 650 ~ 20000 Hz

Buzz, Rattle, etc.

N/A Should not be Audible with 2.45 V Sine Wave from 300 Hz to 3.4 kHz in 1 cc Enclosure

Polarity

N/A When Positive Voltage is Applied to the Positive Terminal, the Diaphragm will Move Outward

Operating Temperature

N/A -20 ~ +70 ºC

Storage Temperature

N/A -40 ~ +85 ºC

Weight

N/A 1.5 g

Environmental Protection

N/A Ingress Protection (IP67)

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU

Materials

Frame Material

N/A Polyphthalamide (PPA)

Magnet Material

N/A Neodymium (NdFeB)

Mechanical Reliability and Environment Testing

High Temperature Test

N/A 96 hours at +85ºC ± 3ºC followed by three hours in normal room temperature

Low Temperature Test

N/A 96 hours at -40 ºC ± 3 ºC followed by three hours in normal room temperature

Humidity Test

N/A 96 hours at +40 ºC ± 3 ºC with relative humidity at 90% ~ 95% followed by 6 hours in normal room temperature

Temperature Cycle Test

N/A The part shall be subjected to 12 cycles using the following procedure:
Low temperature: -40ºC±3ºC
High temperature: +80ºC±3ºC
Cycle: 2 hours at High, 5 minutes High to Low, 2 hours at Low, 5 minutes Low to High

Vibration Test

N/A 10-55 to 10 Hz sine sweep, per minute at 1.5 mm amplitude
2 hours in each axis X, Y, and Z.

Drop Test

N/A Mount speaker to 100 g fixture, drop fixture 1.5 meters, twice per side and twice for each corner

Load Test

N/A White noise is applied at the speakers rated power for 96 hours at room temperature with speaker in 1 cc enclosure.

Note for Reliability Testing

N/A After each test, the speaker's SPL shall be ±3 dB of the original SPL

Features

Features

N/A
  • PEEK diaphragm for flat frequency response
  • High-energy neodymium motor
  • Only 2.5 mm thick with spring-loaded contacts
  • Dustproof and waterproof IP67-rated face

Note

Note

N/A Specifications subject to change or withdrawal without notice.