PUI Audio?'s Mobile Series line of speakers and receivers is designed for cutting-edge applications such as smart watches. The AS01208MS-SP12-WP-LW100-R is designed for submersion in water depths greater than 1 meter for 30 minutes when properly mounted.
Unit of Measure

Specifications

Available

N/A {0}

Manufacturer Stock

N/A {0}

Brands

N/A PUI Audio™

Manufacturer

N/A PUI Audio�, Inc.

Tolerance (±)

N/A 0.5 mm

Angle Tolerance (±)

N/A 3 º

Rated Input Power

N/A 0.3 W

Maximum Input Power

N/A 0.5 W

Impedance

N/A 8 Ω

Impedance Tolerance (±)

N/A 15 %

Sensitivity

N/A 88 dB

Sensitivity Tolerance (±)

N/A 3 dB

Testing Condition for Sensitivity

N/A (Sound Pressure Level (SPL) at 2 kHz) 1.55 V at 10 cm in 2 cc Enclosure

Resonant Frequency in 2 Cubic Centimeter (cc) Enclosure

N/A 1300 Hz

Resonant Frequency Tolerance (±) in 2 Cubic Centimeter (cm³) Enclosure

N/A 20 %

Frequency Range

N/A 850 ~ 20000 Hz

Testing Condition for Frequency Range

N/A -10 dB

Ingress Protection Rating

N/A Ingress Protection (IPX8)

Buzz, Rattle, etc.

N/A Should not be Audible with 1.55 V Sine Wave from 1.25 to 5 kHz

Polarity

N/A When Positive Voltage is Applied to the Positive Terminal, the Diaphragm will Move Outward

Operating Temperature

N/A -20 ~ +60 ºC

Storage Temperature

N/A -30 ~ +70 ºC

Weight

N/A 1.0 g

Industry Standards

N/A Restriction of Hazardous Substances (RoHS) 2011/65/EU

Materials

Frame Material

N/A Polyphthalamide (PPA)

Magnet Material

N/A Neodymium (NdFeB)

Mechanical Reliability and Environment Testing

High Temperature Test

N/A 96 hours at +60ºC ± 3ºC followed by three hours in normal room temperature

Low Temperature Test

N/A 96 hours at -20 ºC ± 3 ºC followed by three hours in normal room temperature

Humidity Test

N/A 96 hours at +30 ºC ± 3 ºC with relative humidity between 92% and 95% followed by 3 hours in normal room temperature

Vibration Test

N/A 10-55 to 10 Hz sine sweep with 1.5 mm amplitude
2 hours in each axis X, Y, and Z.

Drop Test

N/A Drop the speakers onto a 40 mm thick board 10 times from a height of 75 cm

Load Test

N/A White noise is applied at the speakers rated power for 96 hours at room temperature.

Note for Reliability Testing

N/A After each test, the speaker's SPL shall be ±3 dB of the original SPL

Features

Features

N/A
  • High output in one of the smallest form factors for a speaker
  • 100 mm long UL3302 lead wires for quick implementation
  • IPX8 rated face for waterproof protection when properly mounted

Note

Note

N/A Specifications subject to change or withdrawal without notice.