Request Information
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A Cornell Dubilier Orange Drop®

Manufacturer

 N/A Cornell Dubilier

Direct Current (DC) Voltage

 N/A 400 V

Capacitance

 N/A 0.22 µF

Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature

 N/A 10 %

Operating Temperature Range at Fill Voltage

 N/A -55 to +85 ºC

Voltage Derating at +105 Degree Celsius (ºC) Temperature

 N/A 70 % of +85 ºC Rating

Voltage Derating at +125 Degree Celsius (ºC) Temperature

 N/A 50 % of +85 ºC Rating
Lead Wire Material1 N/A Tinned Copper-Clad Steel

Lead Wire Diameter

 N/A 0.032 in0.8 mm

Maximum Dissipation Factor at 1 Kilohertz (kHz) Frequency, +25 Degree Celsius (ºC) Temperature

 N/A 0.75 %

Encapsulation

 N/A Conformal coating of orange, flame retardant epoxy. Meets UL94V-0 specifications.

Dielectric Construction

 N/A Polyester film, single section design. Non-inductively wound with extended aluminum foil.

Lead Bend Test

 N/A After 3 consecutive 180º bends. No damage.

Dimensions

Maximum Dimension L

 N/A 0.80 in20.3 mm

Maximum Dimension T

 N/A 0.31 in7.9 mm

Maximum Dimension H

 N/A 0.58 in14.7 mm

Insulation Resistance

Insulation Resistance at +25 Degree Celsius (ºC) Temperature

 N/A 100000 MΩ

Insulation Resistance at +85 Degree Celsius (ºC) Temperature

 N/A 1500 MΩ·µF

Insulation Resistance at +105 Degree Celsius (ºC) Temperature

 N/A 250 MΩ·µF

Insulation Resistance at +125 Degree Celsius (ºC) Temperature

 N/A 25 MΩ·µF

General Specifications

General Specifications

 N/A The Type 225P Orange Drop® is designed and manufactured for operation in a wide range of demanding environments and applications. Type 225P capacitors are wound from the most reliable polyester film and aluminum foil available and are protected by a rugged conformal coating of orange epoxy. They may be operated up to +125 ºC with proper derating.

The combination of proven dependability and extensive availability through CDE distribution make the 225P an ideal choice for many commercial and industrial electronic applications, from power supplies and instrumentation to audio amplifiers and test equipment.

Operating Temperature Range

Operating Temperature Range

 N/A The standard operating temperature range for polyester film is -55 ºC to +85 ºC. The 225P may be operated a t full voltage within this temperature range.
The 225P may be operated up to +105 ºC provided the DC working voltage is reduced to 70 % of the +85 ºC rating (full rating), and up to +125 ºC with a 50 % reduction from the +85 ºC rating (full rating).
For more specific details regarding operation above +85 ºC please contact our design engineering department.
The maximum operating temperature for the 225P polyester film capacitors is +125 ºC.

Dielectric Withstanding Voltage

Dielectric Withstanding Voltage

 N/A Units shall withstand a DC potential of 250 % of rated voltage applied between terminals for not more than 5 seconds.

Humidity Testing

Humidity Testing

 N/A Units subjected to 95% relative humidity for 72 hours with no voltage applied at +75 ºC. After 4 hours of drying minimum product of insulation resistance and capacitance shall be 5,000 MΩ·µF.

Direct Current (DC) Voltage Life Test

Direct Current (DC) Voltage Life Test

 N/A 500 hours at +85 ºC at 150 % of rated voltage. After test; capacitance shall not have changed by more than ±5 % of initial value, insulation resistance shall not have decreased by more than 50 % of initial value and dissipation factor shall not have increased to more than 1.0 %. In addition, there should be no open or short circuits, and no sign of visible damage.

Features

Features

 N/A
  • Radial-lead. Pressed profile.
  • Non-inductively wound, extended foil construction.
  • Over 35 years of proven dependability.
  • Wide availability through CDE Distribution.
  • 1 20 AWG