Radial Leaded, Epoxy Dipped
Unit of Measure
Specifications
|
Dimensions
|
Maximum Dissipation Factor 25 Degree Celsius (ºC) Temperature
|
Load Life
|
Damp Heat Test
|
Features
|
Applications
Specifications
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Cornell Dubilier |
Manufacturer |
N/A Cornell Dubilier |
Working Direct Current (DC) Voltage |
N/A 630 V |
Capacitance |
N/A 0.1 µF |
dv/dt Rating |
N/A 90 V/µs |
Operating Temperature Range |
N/A -40 to +105 ºC |
Capacitance Tolerance (±) at 1 Kilohertz (kHz) Frequency, 25 Degree Celsius (ºC) Temperature |
N/A 10 % |
Optional Capacitance Tolerance (±) |
N/A 5 % |
Frequency Range |
N/A 50 Hz60 Hz |
Alternating Current (AC) Peak Voltage1 | N/A 220 V |
Self-Inductance |
N/A <1 Nano-Henry per mm of body length and lead length |
Terminal to Terminal Dielectric Strength |
N/A 160 % of VDC applied for 2 Seconds and 25 ºC |
Insulation Resistance at 25 Degree Celsius (ºC) Temperature (<70 % Relative Humidity (RH)) for 1 Minute at 100 Direct Current (DC) Voltage (VDC) Applied |
N/A 9000 MΩ |
Capacitance Drift Factor |
N/A <1.0 % after 2 years at 40 ºC |
Capacitance Temperature Coefficient |
N/A +400 ppm/ºC±200 ppm/ºC |
Dielectric |
N/A Polyester |
Construction |
N/A Metallized Film |
Coating |
N/A Flame Retardant epoxy resin (UL94V0) |
Leads |
N/A Lead free tinned copper leads |
Dimensions
Dimension L |
N/A 18.5 mm |
Dimension H |
N/A 14 mm |
Dimension T |
N/A 6.3 mm |
Dimension S |
N/A 15 mm |
Dimension d |
N/A 0.8 mm |
Maximum Dissipation Factor 25 Degree Celsius (ºC) Temperature
Maximum Dissipation Factor at 25 Degree Celsius (ºC) Temperature, 1 Kilohertz (kHz) Frequency |
N/A 1 % |
Maximum Dissipation Factor at 25 Degree Celsius (ºC) Temperature, 10 Kilohertz (kHz) Frequency |
N/A 1.5 % |
Load Life
Load Life |
N/A 2000 Hours, +85 ºC with 125 % of rated voltage |
Capacitance Change (Load Life) |
N/A ≤ 5 % of Initially Measured Value |
Dissipation Factor (Load Life) |
N/A ≤ 0.005 at 1 kHz and 25 ºC |
Insulation Resistance (Load Life) |
N/A ≥ 50 % of Maximum Specified Value |
Damp Heat Test
Note for Damp Heat Test |
N/A 1000 Hours, 93 % RH (±2 %), +40 ºC and no voltage applied |
Capacitance Change (Damp Heat Test) |
N/A ≤ 5 % of initially measured value |
Dissipation Factor (Damp Heat Test) |
N/A ≤ 0.005 at 1 kHz and 25 ºC |
Insulation Resistance (Damp Heat Test) |
N/A ≥ 50 % of maximum specified value |
- 1 For T> +85 ºC , The voltage must be decreased by 1.25 % per ºC
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok