Request Information
The world's first 0.8 mm pitch wire-to-board insulation displacement connector. Side entry type is only 3.9 mm depth and 1.75 mm height after mounting on the PC board, and top entry type is only 2.2 mm depth and 3.9 mm height. Compared to the conventional 1.0 mm pitch SSR connector, occupation space on the board is reduced by 34% (side entry type).
Unit of Measure

Specifications

Available

 N/A {0}

Manufacturer Stock

 N/A {0}

Brands

 N/A JST

Manufacturer

 N/A JST

Series

 N/A SUR

Pitch Size

 N/A 0.8 mm

Industry Standards

 N/A Canadian Standards Association (CSA®) Certified LR20812 Restriction of Hazardous Substances (RoHS) Underwriters Laboratories (UL) Recognized E60389

Circuits

 N/A 10

Quantity Per Reel

 N/A 3500

Alternating Current (AC) Rating for 32 American Wire Gauge (AWG)

 N/A 0.5 A

Alternating Current (AC) Rating for 36 American Wire Gauge (AWG)

 N/A 0.2 A

Direct Current (DC) Rating for 32 American Wire Gauge (AWG)

 N/A 0.5 A

Direct Current (DC) Rating for 36 American Wire Gauge (AWG)

 N/A 0.2 A

Direct Current (DC) Voltage Rating

 N/A 30 V
Temperature Range1 N/A -25 to +85 ºC

Maximum Contact Resistance After Environmental Testing

 N/A 40 mΩ

Minimum Insulation Resistance

 N/A 100 MΩ

Withstanding Alternating Current (AC) Voltage Per Minute

 N/A 200 V

Applicable Conductor Wire Size

 N/A 32 AWG36 AWG

Wire

 N/A 7 Strands, Tin-Coated Copper Alloy

Applicable Insulation Wire Outside Diameter (OD)

 N/A 0.39 mm

Dimensions

Dimension A

 N/A 7.2 mm

Dimension B

 N/A 10.2 mm

Material and Finish

Contact Material2 N/A Copper Alloy, Copper-Undercoated, Tin-Plated

Wafer Material

 N/A Natural Polyamide (PA 66), UL94V-0
Solder Tab Material3 N/A Brass, Copper-Undercoated, Tin-Plated

Features

Features

 N/A
  • 3-point grip construction
  • Super fine wires are applicable
  • Shrouded header
  • Twin U-slot insulation displacement section

Note

Note

 N/A Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog.
Contact JST for details.

This product displays (LF)(SN) on a label.
The products listed above are supplied on embossed-tape
  • 1 Including temperature rise in applying electrical current
  • 2 Reflow treatment
  • 3 Reflow treatment