+105 ?C Low Impedance Surface Mount Chip Aluminum Electrolytic Capacitors
Unit of Measure
Specifications
|
Dimensions
|
Impedance Ratio at Low Temperature (120 Hertz (Hz))
|
Load Life
|
Resistance to Soldering Heat
|
Ripple Current Multipliers
|
Features
Specifications
Available |
N/A {0} |
Manufacturer Stock |
N/A {0} |
Brands |
N/A Cornell Dubilier |
Manufacturer |
N/A Cornell Dubilier |
Series |
N/A AXZ |
Direct Current (DC) Voltage |
N/A 35 V |
Capacitance |
N/A 220 µF |
Maximum Equivalent Series Resistance (ESR) at 120 Hertz (Hz) Frequency, +20 Degree Celsius (ºC) Temperature |
N/A 1.055 Ω |
Impedance at 100 Kilohertz (kHz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 0.17 Ω |
Maximum Root Mean Square (RMS) Ripple Current at 100 Kilohertz (Hz) Frequency, +105 Degree Celsius (ºC) Temperature |
N/A 450 mA |
Capacitance Tolerance (±) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 20 % |
Operating Temperature Range |
N/A -55 to +105 ºC |
Maximum Dissipation Factor (Tan δ) at 120 Hertz (Hz) Frequency, 20 Degree Celsius (ºC) Temperature |
N/A 0.14 |
Leakage Current at 2 Minutes |
N/A 0.01 CV or 3 µA, Whichever is greater |
Shelf Life |
N/A 1000 hours at 105 ºC with no applied voltage |
Impedance Ratio at Low Temperature (120 Hertz (Hz))
Impedance Ratio at Low Temperature (120 Hertz (Hz)) at -25/+20 Degree Celsius (ºC) Temperature |
N/A 2 |
Impedance Ratio at Low Temperature (120 Hertz (Hz)) at -40/+20 Degree Celsius (ºC) Temperature |
N/A 3 |
Load Life
Load Life |
N/A 2000 Hours at 105 ºC with rated voltage (D ≤ 6.3, 1000 hrs.) |
Capacitance Change (Load Life) |
N/A ≤ 25 % of initial measured values |
Dissipation Factor (Load Life) |
N/A ≤ 200 % initial specified value |
Leakage Current (Load Life) |
N/A ≤ 100 % initial specified value |
Resistance to Soldering Heat
Resistance to Soldering Heat |
N/A Capacitors placed on a 250 ºC hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions after being cooled to room temperature. |
Capacitance Change (Resistance to Soldering Heat) |
N/A ≤ 10 % of initial measured value |
Dissipation Factor (Resistance to Soldering Heat) |
N/A ≤ The initial specified value |
Leakage Current (Resistance to Soldering Heat) |
N/A ≤ The initial specified value |
Ripple Current Multipliers
Ripple Current Multipliers at 60 Hertz (Hz) Frequency |
N/A 0.45 |
Ripple Current Multipliers at 120 Hertz (Hz) Frequency |
N/A 0.5 |
Ripple Current Multipliers at 1 Kilohertz (kHz) Frequency |
N/A 83 |
Ripple Current Multipliers at 10 Kilohertz (kHz) Frequency |
N/A 1.0 |
Ripple Current Multipliers at 6.5 Degree Celsius (ºC) Temperature |
N/A 0.45 |
Ripple Current Multipliers at 85 Degree Celsius (ºC) Temperature |
N/A 1.7 |
Ripple Current Multipliers at 105 Degree Celsius (ºC) Temperature |
N/A 1 |
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.Ok